Description Clear Focus ClearLam Clear Focus ClearLam 1.5 Mil Optically Clear Polyester Cold Overlaminate. • Has the rigidity to span, instead of sink into, the film’s holes, which maintains optimum one-way visibility. • Protects the graphic from dust, water and dirt that may collect in the perforated areas. • Up to 2 year durability. • For small-format graphics on flat surfaces only. • Avoid stretching the laminated graphic during installation. The vinyl has a memory and may return to its original shape, causing the film to lift off the glass. • For best results, trim panels prior to installation. Product description: Areas of use: Standard roll sizes: ClearLam is a 1.5-mil pressure-sensitive polyester cold-laminating film. ClearLam protects graphics against marking and scuffing, enhances the water resistance of graphics and provides UV protection, thereby increasing the life of the printed image. • Protective overlaminate for CLEAR FOCUS One Way Vision™ calendered window graphics films. • Also compatible with cast print media. • Glass or transparent flat surfaces. Not designed for use on curved surfaces. • For use on small-format graphics only. • Can be cleaned with mild non-abrasive detergents. 36 & 54 in. x 100 ft. (91.44 & 137 cm x 30.48 m) CLEAR FOCUS ClearLam® Optically Clear Polyester Overlaminating Film Typical Performance Values – Not intended for specification use Product Code: CFCL Product Gloss Level Adhesive Typical Adhesion Values Film Thickness (including adhesive) Release Liner UV Resistance Chemical Resistance Outdoor Durability Minimum Application Temperature Service Temperature Range Shelf Life Application Optically clear polyester overlaminating film 125 (avg.) at 60° Clear permanent acrylic 180° Peel Test Substrate 15 min. 24 hrs. Stainless Steel 2.3 lbs/in. 31 lbs./in. Approx. 1.5 mils (38.1 microns; .0015 inches) gloss polyester Approx. 1 mil (25.4 microns; .0010 inches) polyester Good to excellent Resistant to ammonium hydroxide – 10%, antifreeze, detergent, distilled water, gasoline and motor oil – SAE 20 Up to 2 years 40° F (4° C) 0° F to 140° F (-17° C to 60° C) 2 years from ship date when stored at 70° F (21° C) and 50% relative humidity. Designed for use with graphics to be applied to flat surfaces. Not recommended for use on curved surfaces.
