Adding an amp or tuner Use the SB1 thru output to feed your on-stage amplifier. For fun, add pedals after the SB-1 to color your tone on-stage while leaving the PA signal clean. Specifications Audio circuit type: Active Buffer with Phase Splitter Number of channels: 1 Frequency response: 20Hz to 20KHz Dynamic range: >100dB Gain: 1.3dBu/ 4.4dB Clip Level: 3.3dBu/ 12.3dBu Total harmonic distortion: <0.006% Intermodulation Distortion: <0.01% Phase Deviation: 25/12° Maximum Input Impedance: 800K/23K Output Impedance: 330 Ohms Equivalent Input Noise: -101dBu Noise: -97dBu Maximum Input: 2dBu/ 8dBu Features Input pad, 180° polarity reverse, Ground lift Input Connectors: 1/4″ Output Connectors: XLR General Construction: 16 gauge steel chassis & outer shell Size (L x W x D): 4.5″ x 1,85″ x 1.35″ (114mm x 47mm x 34mm) Weight: 0.55 lbs (250 grams) Shipping size (L x W x D): 8″ x 5″ x 3″ (203mm x 127mm x 76mm) Shipping weight: 0.8 lbs (365 grams) Power: 48V phantom power, 5mA Conditions: For use in dry locations only between 5°C and 40°C Warranty: Radial 3-year, transferable
