DBX ZC-7 – Wall-Mounted Page Assignment Controller for ZonePro

Description DBX ZC-7 The DBX ZC-7 is a wall-mount programmable push-to-talk page assignment controller for use with ZonePro devices. It features four push-buttons with room on the side for labelling. The ZC-7 has two RJ-45 jacks for connection via standard CAT5 cables. The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. Architects’ and Engineers’ Specifications: The remote device shall provide programmable push-to-talk page assignment for the dbx® ZonePRO™ devices. The remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-7 remote controller. Features: Programmable Volume Control Program or Scene Selection Programmable Contact Closure Interface Up to 1000 ft. on CAT 5 Cable Programmable Push-To-Talk Paging Programmable Source Selection The ZC-8 provides both programmable source selection and volume control to the ZonePro 640 and 641 DIP switches allow identification with connection to the processing device via CAT 5 cable on RJ-45 connectors One of nine Zone Controllers options for the DBX ZonePro products MPN: ZC8 Manufacturer: DBX Specifications: Connectors: (2) RJ-45 Series Wiring: Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft. Parallel Wiring using ZC-BOB: Up to Six Zone Controllers: 1000 ft. Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher. Safety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065